Mid-Size Super 250 Watt HPS 28,500 Lumens Accessories!

240 Volt Detachable Power Cord

All remote ballast SunSystem lighting systems will run on 120 volts or 240
volts with the flip of a switch. Systems come with a 120 volt detachable
power cord. The 8 foot 240 volt power cord is sold separately. $11.00 with
system $19.00 with out system.

240 V Cord w/System
$11.00
Timer upgrades
 
Intermatic Integrated Timer
Intermatic PB 913 U.L. recognized panel mounted single pole, single throw timer with trippers. 20 amp Resistive, 1800 Watt tungsten. This is a custom made timer made exclusively for Sunlight Supply.  This is ONLY available with the purchase of a New Sun System Ballast or Complete System.
 

Intermatic Integrated Timer

$29.95
Mid-Size Super protective glass
$17.00
 

Upgrade lamp* to Super Agro Lamp.
29,500 Lumens
$30.00
*Complete system must be purchased.

HydroFarm Active Air Blower
Exchange stale air with fresh air is an excellent way to keep
temperature or humidity under control or to cool your lighting reflector. These quiet UL listed industrial-quality blowers mount easily into the wall. Pre-wired with an 8 ft. power cord.
For rooms up to 20'x20' or 2-4 grow lights.

265 CFM Hydrofarm Active Air Blower
$89.95

Dayton Vent Blowers
Air exchange is necessary to help fight CO2 depletion and to cool your grow room or lights down for best plant growth. There's no more efficient way of exchanging air than with an exhaust blower. Dayton blowers operate at very high static pressures. This gives plenty of power to move air down a long tube or from room to room. All exhaust blowers come ready to mount in place, power cord installed. To determine the approximate size blower you need, divide the cubic footage of the grow room by 5. This gives the CFM (Cubic Feet per Minute) of air movement required. This formula assumes that the blower must be large enough to replace all the air in the room in 5 minutes. It's better to oversize the fan than getting a fan that is too weak to get the job done.

265 CFM Dayton Vent Blower
$109.95

Vent Fan In-Line Adapter
The Vent Fan In-Line Adapter connects to the Active Air Vent Fan or
Dayton and to the ductwork to funnel hot air away from lighting systems. The
medium adapter works with the 265 CFM Active Air Vent Fan and the large works with the 465 CFM. Helps keep your lighting and grow room running cooler.

 

Medium Vent Fan In-Line Adapter
$11.00

 

In-Line Centrifugal Fans - The Most Power

 

Fantech FX Series

  • German Made
  • Galvanized steel housing features baked powdercoat finish, per commercial code applications
  • Powered by external rotor motorized impeller for excellent heat dissipation, even at low RPM
  • Tested and approved by UL and CSA(or equals)
  • Suitable forairstreamtemperatures up to 140° F.
  • 10" circular duct diameter
  • Airflow 590 CFM
  • External rotor motor, Class B insulation for long and maintenance free operation
  • Automatic reset termal overload protection
  • Permanently lubricated sealed ball bearings
  • True airfoil backward curved impeller
  • External wiring box for ease of connection
  • 100% speed controllable
  • Five-year factory warranty
FanTech FX 6" - 392 CFM
$260.00
 
FanTech FX 8" - 521 CFM
$310.00
 

Fantech FR Series

  • German made
  • Prewired and supplied with a mountig bracket for easy installation
  • Available singularly with bracket or in a variety of kits for specific
    applications. Each kit includes the appropriate fan and accessories
  • Tested and approved by UL and CSA (or equals)
  • Approved for residential and commercial applications and for wet
    locations
  • Suitable for airstream temperatures up to 140° F
  • Easy connection using external wiring box with waterproof gasket
  • 563 CFM
  • 10" duct diameters
  • 100% speed controllable
  • Five-year factory warranty

FanTech FR 6" - 243 CFM
$194.95
FanTech FR 8" - 492 CFM
$284.95
 

Light Rail 3.5
The Light Rail 3.5 runs by a self-propelled 6 or 10 rpm motor; no pulleys, chains, or gears. Ideal for rectangular growing areas or aquariums. The 6 foot rail can be expanded to 9 feet and has adjustable switch stops, to enable various travel lengths. The Light Rail 3.5 Intelli Drive travels at approximately 2 feet per minute. The adjustable Intelli Drive time delay feature enables your lamp to pause at each end of the track for 0-60 seconds. The Add-a-lamp kit allows you to expand the system from 6' to 12', moving two reflectors in-line with one motor.

Light Rail 3.5 Intelli Drive features are:

  • Instrument grade drive motor totally sealed from the environment and runs
    on only 5 watts.
  • Self clutch drive design with automatic traction control.
  • Lightweight, easy to install, extendable 6' aluminum track.
  • Heavy duty carrier wheels
  • 2 Year Warranty


Reflectors not included.
Light Rail 3.5 6 rpm Intelli Drive
$209.95  
Light Rail 3.5 10 rpm Intelli Drive
$227.95  
Light Rail 3.5 6 rpm Intelli Drive Motor Only
$179.95
6 foot rail
$39.95  
3 foot rail
$26.95  
Light Rail III Drive Wheel Kit 
$9.95
Light Rail III Auxiliary Trolley 
$19.95
Light Rail III Add-a-lamp Kit 
$69.95
Light Rail III Smart Box 
$49.95

Register for TCS-Hydroponics email updates

Top | Home | Catalog Index | Payment Information | Shipping Information | Contact Info | Privacy Policy | Site Map