Lg. Super Horizontal Reflector
Will accept any size bulb.
22.25 in long x 24 in. wide
Covers large areas even if hung close to plants.
Can be air-cooled with optional hose fittings.

Vertizontal Reflector
The Vertizontal reflector burns MH or HPS lamps in the horizontal position but in an eight sided parabolic reflector. This way much of the light is thrown downward without interruption and the balance is split up by our uniquely shaped center piece which divides up light and directs it outward in eight different directions simultaneously. The center is made entirely of spectral pebble aluminum for maximum reflectivity and evenness.

Advantages of Vertical Reflectors

• Because of their large size, wide area coverage from low mounting height.
• Low mounting height reduces distance to plants and thus increases light levels.
• As light moves away from its source (the lamp) it diminishes as follows:
  Light < 1/Distance2.
  

Advantages of Horizontal Reflectors

• HID lamps emit light in a continuous 360° ring emanating out from the arc tube. The main reason that horizontally mounted lamps perform better is because much of their light is directed downward without having to be reflected off of a surface.
• The introduction of specular pebble aluminum inserts increased the light outputs (because of better reflectivity than powder coated steel) and evened out light patterns (because of its better diffusion qualities).

• Body is a "gull-wing" style in which sides
  can contract or expand in or out to adjust
  the beam spread of light
• Spectral pebble body with aluminum ends.
• Will not accept full size MH lamp

Dimensions: 21" long x 17" wide x 7 1/2" tall

Mid-Size Unifier Reflector

• The Unifier reflectors are stamped from one continous piece of aluminum
  a process called Hydro-forming.
• Outstanding Uniformity
• Superior foot candle levels verses competitive hydro-formed reflectors
• Includes socket mounting bracket and chrome wire hangers for easy installation
• Exclusive bracket allows both horizontal and vertical adjustment of the lamp to widen or narrow the beam sprerad of light
• Accepts glass (optional) sold separately

Dimension: 17" long (inlcuding bracket) 10.5" Wide x 7.5" high

Cool Sun Reflector
The Ultimate Combination of Cooling & Performance!

Air passes easily through both ends of the reflector directly over the
lamp for maximum inline air cooling.

• 95% reflective aluminum insert (German Import) offers excellent
  reflectivity & diffusion properties.
• Tempered glass is included with every fixture.
• Rugged & durable electro-galvanized steel housing.
• Socket assembly & lamp cord are built into the reflector... no
  wiring required!
• Prolongs life of expensive H.I.D. lamps.
• 6" air cooled fittings are integrated into the design of the
  reflector - no need for separate fittings !
• White powder coating provides a rust resistant, clean
  appearance.
• Sturdy chrome wire hangers make for easy hanging.
• Sealed reflector won't draw air from inside the room, CO2 stays
  in place!
• Exhausted warm air can be used as a heat source during the
  winter months.
• Eliminates excess heat problems.
  Dimensions: 20.5 in. long x 24 in. wide. x 7.5 in. tall

Replacement Protective Glass
Protective Glass is used when air cooling reflectors. To reduce heat and is
required for UL Listing for all MH horizontal lamps. Glass is tempered and
cut to fit your Sunlight Supply Reflector.